Pizza box stepping stone |
07-18-2004, 11:00 AM
#1 (permalink)
| FOR ONE STONE:
4) wire coat hangers
1) appox 13" take-out pizza box (1 box may be used to make 2-3 tiles)
brick mortar mix (home centers)
large heavy duty garbage bag
coarse sand paper
small rocks (optional)
utility knife
2" wide packing tape
INSTRUCTIONS:
1. Use utility knife to cut lid from box
2. To strengthen sides of box, apply several layers of tape to top edges
& sides of box
3. Cut a sqare from garbage bag about 3" larger on all sides of box
4. To reinforce mortar, place hangars in bottom of box. (do not bend out
of shape. When done properly one hanger hook will be in each corner of
box and the straight sides will form an "X" in the middle when layered)
5. follow manufacturer's instuctions to mix mortar; pour mortar into
box, filling it to about 1/2" from top. Before mortar sets up, use
either finger or a stick to write message in mortar or press small rocks
into it, smoothing mortar around rocks. Allow to set completely.
6. Using edges of plastic to lift tile, remove tile from box. Remove
plastic from bottom of tile. If ncessary, use sandpaper to smooth edges
of tile. |